OS = CentOS 7 64 bit
Elasticsearch Server = 172.17.20.100:9200
Logstash Server = 172.17.20.100:5044
Kibana Server = 172.17.20.100:5601
rpm -ivh filebeat-6.1.1-x86_64.rpm
Configure Filebeat
#============= Filebeat prospectors ==============
filebeat.prospectors:
- type: log
# Change to true to enable this prospector configuration.
enabled: true
# Paths that should be crawled and fetched. Glob based paths.
paths:
- /var/log/*.log
# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering
# fields:
# level: debug
# review: 1
registry_file: /var/lib/filebeat/registry
#============== Filebeat modules ================
filebeat.config.modules:
# Glob pattern for configuration loading
path: ${path.config}/modules.d/*.yml
# Set to true to enable config reloading
reload.enabled: false
# Period on which files under path should be checked for changes
# reload.period: 10s
#========== Elasticsearch template setting ===========
setup.template.settings:
index.number_of_shards: 3
#index.codec: best_compression
#_source.enabled: false
setup.template.name: "filebeat"
setup.template.fields: "/etc/filebeat/fields.yml"
setup.template.overwrite: false
===================== Kibana ===================
setup.kibana:
# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
host: "172.17.20.100:5601"
#-------------------------- Elasticsearch output ------------------------------
#output.elasticsearch:
# Array of hosts to connect to.
hosts: ["172.17.20.100:9200"]
template.name: filebeat
template.path: filebeat.template.json
# Optional protocol and basic auth credentials.
#protocol: "https"
#username: "elastic"
#password: "changeme"
#----------------------------- Logstash output --------------------------------
output.logstash:
# The Logstash hosts
hosts: ["172.17.20.100:5044"]
# Optional SSL. By default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
#==================== Logging ====================
# Sets log level. The default log level is info.
# Available log levels are: critical, error, warning, info, debug
#logging.level: debug
# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]
Restart Filebeat
systemctl restart filebeat
Enable on every boot
systemctl enable filebeat
